DIN Switch Power Supply (BDR-120)

DIN switching power supply, SMPS, switching power supply, switching power adapter, DIN rail switching power supply, AC/DC switching power supply, AC power supply, industrial power supply
Summary:

Single unit output: Powers 120W
Input voltage 110V/220V± 20%
100% full load burn-in test
Fixed switching frequency at 47-63Hz
Protections: Short circuit/Overload/Over voltage
Installed on DIN rail TS35/7.5 or15
Approvals: CE
Size: 65.5*125.2*100mm

Model Specification
BDR-120W-12
BDR-120W-15
BDR-120W-24
BDR-120W-48

DC output
12V 10A 15V 8A 24V 5A 48V 2.5A
Wave and noise
50MVP-P 50MVP-P 50MVP-P 50MVP-P
Inlet stability
± 0.5% ± 0.5% ± 0.5% ± 0.5%
Load stability
± 0.5% ± 0.5% ± 0.5% ± 0.5%
Efficiency
76% 80% 80% 80%
Adjustable range for DC voltage
± 10% ± 10% ± 10% ± 10%
AC input voltage range
110/220V± 20% 47~63Hz

AC input voltage range
Cold-start current 30A/230V
OverLoad protection
105%~135%hicup mode: Auto-recovery

OverLoad protection
115%~135% rated output voltage
Setup, rise, hold up time
300ms, 50ms, 80ms
Withstand voltage
I/P-O/P, I/P-FG: 1.5Kv O/P-FG: 05Kv 1minute
Isolation resistance
I/P-O/P, I/P-FG, O/P-FG: 500VDC/100MΩ
Working temperature
-10~+50
Safety standards
Design refer to GB4943, UL60950, EN60950
EMC standards
Design refer to GB9254, EN55022 classB
Weight
0.79kg